Description
69103 KBS ENGINE ENAMEL MOTORCOATER FORD CORPORATE BLUE 400G AEROSOL
MotorCoater Aerosol is easy to apply, offers superb coverage and produces a professional finish.
MotorCoater can be applied directly to clean, dry and rust-free metal, over a suitable primer or over well-prepared existing coatings.
FEATURES
Approximately 2-4m2 coverage per aerosol
High quality epoxy reinforced enamel
Self levelling
Withstands temperatures up to 240C
Matches OEM standard colours
Will not blister, flake, crack or peel
Oil, transmission fluid & petrol resistant
SURFACE PREPARATION
Ensure surfaces are clean, dry and free of rust and loose paint. Lightly sand smooth and glossy surfaces or use a primer to maximise adhesion.
APPLICATION
The ideal spray can temperature for ensuring optimal propellant-paint mixture for spraying is between around 20 and 25C. Gently heat the can in warm water prior to spraying if necessary. Shake can vigorously for at least 1 minute after the mixing ball begins to rattle. Hold can approximately 15-20cm from surface to be sprayed and apply two or more light coats a few minutes apart.
Recoat within 1 hour or after 24 hours. Full cure after 7 days.