Description
CR01063 | CAR-REP AEROSOL CHROME EFFECT 400ML
Leaves shiny decorative surface, dries fast, and covers well. For metal, wood, glass and most artificial surfaces. Limited wear and weather resistance.
Coverage is approximately 1-2 m2. Drying time (at 20C, 50% relative air humidity): Dust-dry: after approx. 30 minutes, Dry to touch: after approx. 2 hours, Completely dry: after 48 hours
We recommend CPS403 Clear Coat Effect spray on dry surface for better resistance. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust.
Shake the spray can well before use. Spray a small test patch on an invisible area.
Spray several thin layers from a distance of 15 cm.
Two paint layers are needed for adequate film thickness.
Let the surface dry about 5 min. between each layer.
Clean the nozzle by spraying the can upside down until only propellant comes out. Wipe off any excess paint from nozzle if necessary.
Special Note* Do not polish the finished painted surface or the effect will be flattened
Also available in:
CR01058 Gold Effect
CR01059 Copper Effect